When Memory Is Full Use “Creating a Snapshot” in the Planning and Configuration Guide to adjust the fusing temperature and the amount of fuser oil used during printing. Changing A Stored Program Finally, you must close the front cover and test your Lanier Multifunctional Device. In duplex printing mode there is a noticeable difference in the printing contrast between the front and back sides of the form, even though the Contrast Switch setting is set the same on both printers.
|Date Added:||5 June 2005|
|File Size:||54.26 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Known issues with non-Postscript printer drivers? | Spread for WinForms | Spread | GrapeCity Forums
Ensure that the preheat platen temperature is set correctly for the forms being used. IBM support does not actively search for information about new or different printers.
See Cleaning the printer and Cleaning the oiler belt. Opening the drain resets the developer mix usage timer, which could result in the developer mix being used beyond its normal life and result in immediate print quality problems.
Storing Copy Settings In Memory Status Display Indicators Copying Book Originals When all signs of ink have vanished, replace in the printer. Answered on Dec 14, 52 views. Selecting Special Original Mode The Lanier is one of the few devices in the mid size range to ever be released with a finisher as a standard piece of hardware.
For text, OCR, and bar codes: Selecting The Original Mode PostScript was developed by Adobe, but is used by a number of other printer manufacturers, though typically in laser printers.
Main Power Switch For images and solid-area fill: This document might not pfint all available printer models. This is commonly found in dot matrix or line printers, ink jet printers, or older laser printers that do not support the HP PCL5e printer language.
Watson Product Search Search. Don’t have an account? Ask a Question Usually answered in minutes!
For information on printers from other manufacturers, please refer to the following documents: Not finding what you are looking for? Control Panel – Continued The following table describes possible print quality problems and suggests actions that may correct the symptoms.
This problem may occur at the point where peint stop in the fuser.
To clean a print head, run under the tap for a few minutes, very hot prin on both sidesmetal bars and where the ink enters.
Using The Finisher Option Answered on Apr 05, 55 views.
Lanier 5645 Manuals
Information on Printers from Various Manufacturers N Component Locations – Rear Then, you must completely remove the exhausted toner cartridge by lifting it up, but avoid shaking it. Erase Center And Border See Changing the developer mix.
If necessary, remove the coronas and look for forms chads in the wire or corona housing.